Kyoritsu 2009R Manual do Utilizador descarregar pdf (Página 28)

② Slide the terminal cover to the right to disclose the OUTPUT

terminal and insert the output plug into the terminal. Make

connection to the recording device.

③ When the plug is inserted into the output terminal, auto-range

function is cleared.

Set the range depending on the state of Data Hold Switch.

Data Hold Switch OFF 400A range

Data Hold Switch ON 2000A range

Note： After measurement, be sure

to return Data Hold Switch to OFF

position.

④ Set the function selector switch to the desired position (ACA or

DCA) and follow appropriate measurement instructions.

NOTE

● During current measurement, keep the transformer jaws fully

closed. Otherwise, accurate measurement cannot be made.

The maximum measurable conductor size is approx. 55mm in

diameter.

● Zero adjustment is not necessary on AC cur

rent range.

●

On DC current range, the Zero Adjust/Reset button may not

completely zero adjust the output voltage from the OUTPUT

terminal. In this case, make zero adjustment on the recording device.

● Connecting the plug to the OUTPUT terminal disables the Auto-

power-off function. The function is enabled on removing the plug

from the terminal.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33

Sem comentários

Kyoritsu 2009R Manual do Utilizador Página 28